GRC構件是以耐堿玻璃纖維作增強材，低堿度水泥為膠結材并摻入適宜集料構成基材，通過噴射、立模澆注、擠出、流漿等生產工藝而制成的輕質、高強高韌、多功能的新型無機復合材料。與混凝土同等性能及壽命，是一種可再生循環利用的綠色建筑材料。GRC構件形態優美，裝飾在各種大眾小型建筑上，給建筑增添了美感。下面給大家介紹一下GRC構件生產前準備有哪些？
GRC component is a new type of inorganic composite material with light weight, high strength, high toughness and multi-function, which is made of alkali resistant glass fiber as reinforcement, low alkalinity cement as cementitious material and suitable aggregate as base material through spraying, formwork pouring, extrusion, slurry flow and other production processes. With the same performance and service life as concrete, it is a renewable and recycled green building material. GRC components have beautiful shapes and are decorated on various public small buildings, adding beauty to the building. Now let's introduce the preparations for GRC components before production?
一、GRC構件產品打樣確認
1、 GRC component product proofing confirmation
根據甲方提供的效果圖或實物樣品，樣品應注意以下幾點：
According to the renderings or physical samples provided by Party A, the samples should pay attention to the following points:
1、表面效果符合甲方要求。
1. The surface effect meets the requirements of Party A.
2、樣品顏色符合甲方要求。
2. The color of the sample meets the requirements of Party A.
3、應一次抽取兩個樣本。樣品制成后，銷售人員應對其進行一次檢查，以查看其是否合格。檢查時需要注意檢查表面效果，色差，是否存在毛孔，是否龜裂等，并再將模板照片發送給甲方之前確認樣品正確。甲方確認甲方將發送確認后將樣本打包交給甲方的設計師簽名。設計師將為甲方簽字，另一名將簽字退還給公司以取得大宗商品。
3. Two samples should be taken at a time. After the sample is made, the salesperson should first check it to see whether it is qualified. During the inspection, it is necessary to check the surface effect, color difference, pores, cracks, etc., and then confirm that the samples are correct before sending the template photos to Party A. Party A confirms that Party A will send the samples to Party A's designer for signature after confirmation. The designer will sign for Party A, and the other will return the signature to the company to obtain bulk commodities.
4、應提醒公司的打樣人員保持樣品配方，并避免在生產產品時再次摻雜。
4. The proofing personnel of the company should be reminded to keep the sample formula safe and avoid doping again in the production of products.
二、GRC構件圖紙深化確認
2、 GRC component drawing deepening confirmation
設計師應加深良好的圖紙，并應由公司圖紙主管進行審查。驗證正確之后，會將設計者發送給設計者進行審查。甲方確認圖紙后，甲方應簽字并退還公司。甲方設計者簽名和審查的圖紙應保存在的地方，如有任何爭議，可作為今后的依據。
The designer should deepen the good drawings and should first be reviewed by the company's drawing supervisor. After verification, the designer will be sent to the designer for review. After Party A confirms the drawings, Party A shall sign and return them to the company. The drawings signed and reviewed by the designer of Party A shall be kept in a safe place. If there is any dispute, it can be used as a basis for the future.
三、GRC構件模具制作模具驗收
3、 GRC component mold making mold acceptance
山東GRC構件有四種類型的模具。有鋼模，玻璃鋼模，木模和硅樹脂模，并且重復使用率依次降低。鋼模由制造商根據圖紙生產。當需要使用硅膠模具時，必須使用玻璃纖維增強塑料模具。由于硅樹脂模具相對較軟，因此需要由FRP模具支撐以保持產品的形狀。
There are four types of molds for GRC components in Shandong. There are steel mold, FRP mold, wood mold and silicone mold, and the reuse rate decreases in turn. The steel formwork is produced by professional manufacturers according to the drawings. When silicone mold is needed, glass fiber reinforced plastic mold must be used. Because the silicone mold is relatively soft, it needs to be supported by FRP mold to maintain the shape of the product.
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.xinyanse.com And consult our staff, will serve you wholeheartedly.
