The development of sculpture in China can be said to be very long, but abroad is not bad. Next, let's talk about what we should pay attention to when processing stainless steel sculpture?

不銹鋼雕塑在現代雕塑藝術中占有重要地位。不銹鋼具有多種表面處理以拓寬其應用領域，而不同的表面處理使不銹鋼的表面是不同的，使其在應用上是獨特的。不銹鋼雕塑表面常用鏡面不銹鋼、拉絲不銹鋼、不銹鋼漆、彩色不銹鋼。

Stainless steel sculpture plays an important role in modern sculpture art. Stainless steel has a variety of surface treatment to broaden its application field, and different surface treatment makes the surface of stainless steel is different, making it unique in application. Stainless steel sculpture surface commonly used mirror stainless steel, drawing stainless steel, stainless steel paint, color stainless steel.

1、一般機械拋光工序分為幾步？

1. General mechanical polishing process is divided into several steps?

粗磨:主要是用砂粒磨料對粗糙工件表面進行磨削，去除表面的宏觀不平。

Rough grinding: mainly grinding the rough workpiece surface with sand abrasive to remove the macro unevenness of the surface.

中磨:在粗磨的基礎上進一步拋光，去除粗磨痕跡，經過此工藝，工件表面逐漸光滑光亮。

Medium grinding: further polishing on the basis of rough grinding to remove rough grinding traces. After this process, the surface of the workpiece is gradually smooth and bright.

精磨:精磨工藝，達到理想的亮度。

Fine grinding: fine grinding process, to achieve the desired brightness.

為了獲得更好的拋光性能，需要選擇合適的拋光蠟。使用不同的顏色來標記不同種類的拋光蠟，以避免混淆。高含砂量的磨料可以加速整個拋光過程。該工藝是去除拋光蠟和砂輪表面，使材料光滑。

In order to obtain better polishing performance, it is necessary to select suitable polishing wax. Use different colors to mark different kinds of polishing wax to avoid confusion. Abrasive with high sand content can accelerate the whole polishing process. The process is to remove the polishing wax and the grinding wheel surface to make the material smooth.
               

2、機械拋光中常用的術語有哪些？

2. What are the common technical terms in mechanical polishing?

磨料:拋光蠟中的一種顆粒，用作調平工具。

Abrasive: a particle in polishing wax used as a leveling tool.

油脂:硬脂酸、脂肪酸、石蠟等。

Oil: stearic acid, fatty acid, paraffin, etc.

切削力:拋光蠟通過拋光工件而被磨平的能力。

Cutting force: the ability of polishing wax to be smoothed by polishing the workpiece.

3、如何使用拋光輪和拋光蠟？

3. How to use polishing wheel and wax?

拋光輪向操作者的方向滾動，并獲得足夠的速度。將拋光蠟輕輕置于車輪邊緣，并確保其位于滾動軸水平面的下方，直到拋光蠟完全覆蓋在滾動軸表面。輕輕地將一塊干凈的金屬放在拋光輪的表面幾秒鐘，使蠟散開。重復幾次，使蠟均勻地覆蓋在金屬表面。當表面完全被蠟覆蓋時，可以進行拋光處理。如有必要，可將拋光蠟重新涂在車輪上。用于粗磨、中磨(切削磨)和細磨(拋光)的砂輪應分開，而且必須分開，否則在拋光過程中粗糙的顆粒會劃傷金屬表面。

The polishing wheel rolls in the direction of the operator and gains enough speed. Place the polishing wax gently on the edge of the wheel and make sure it is below the horizontal surface of the rolling axle until the polishing wax completely covers the surface of the rolling axle. Gently place a clean piece of metal on the surface of the polishing wheel for a few seconds to disperse the wax. Repeat several times to make the wax evenly cover the metal surface. When the surface is completely covered with wax, it can be polished. If necessary, reapply polishing wax on the wheels. The grinding wheels used for rough grinding, intermediate grinding (cutting grinding) and fine grinding (polishing) should be separated and must be separated, otherwise the rough particles will scratch the metal surface in the polishing process.

以上就是有關不銹鋼雕塑的相關知識，如果還想了解更多，歡迎前來咨詢，我們樂意為您解答。

The above is about stainless steel sculpture related knowledge, if you want to know more, welcome to consult, we are willing to answer for you.