一：鵝卵石鏡面不銹鋼雕像制造流程：鵝卵石鏡面不銹鋼雕像平凡采納304不銹鋼 2mm或4mm板材鍛造，格式形狀可根據需求定制，外表可有鏡面、拉絲、彩色等。
1： Manufacturing process of pebble mirror stainless steel statue: the pebble mirror stainless steel statue is forged with 304 stainless steel 2mm or 4mm plate. The format and shape can be customized according to needs, and the appearance can have mirror, wire drawing, color, etc.
一）、必要根據需求鵝卵石形狀制造出泡沫模具，并且在已做好的泡沫鵝卵石上劃分出區域：
First, it is necessary to produce foam moulds according to the needs of cobblestone shapes, and to divide the area into foam foam.
二）、把泡沫模具分辨好板塊后，進行手工等離子切割開料：
Two), after the foam mould is identified, the manual plasma cutting is used.
三）、開料后鍛構成形，在燒焊拼接：
3） After cutting, the forging structure is formed, and the splicing is carried out after burning and welding:
四）、補焊之后再打磨拋光，先將這些鹽類溶于溶有淀粉的水溶液中，將欲拋光的不銹鋼在此溶液中浸泡，使其外表粘連一層溶有上述鹽類的淀粉層，然后再將此欲拋光的資料浸入硫酸溶液中，在適合的溫度范圍內進行化學拋光，日常理況下，當溶液揭示綠色時，拋光過程即完結。
4） After repair welding, polish and polish. First dissolve these salts in the aqueous solution dissolved in starch, soak the stainless steel to be polished in this solution to make its surface adhere to a starch layer dissolved in the above salts, and then immerse the data to be polished in sulfuric acid solution for chemical polishing within an appropriate temperature range. Under daily conditions, when the solution reveals green, The polishing process is complete.
二：鵝卵石鏡面不銹鋼雕像拋光辦法：
2： Polishing method of pebble mirror stainless steel statue:
一）：洗凈不銹鋼外表的所有的污漬和粘連物，平凡應用的脫脂劑。
1） : clean all stains and adhesions on the surface of stainless steel, and apply professional degreasing agent.
二）：用酸洗劑酸洗不銹鋼外表的氧化毛皮物，如高溫料理過留下的黑色炭質物，和穿越高壓沖壓成型和折彎機料理過的鏡面不銹鋼鵝卵石雕像，一樣也必要酸洗液酸洗一下。
2） : pickling the oxidized fur on the surface of stainless steel with pickling agent, such as the black carbon left after high-temperature cooking, and the mirror stainless steel pebble statue processed through high-pressure stamping forming and bending machine, it is also necessary to pickling with pickling solution.
三)：酸洗完結了用清水洗去鏡面不銹鋼鵝卵石雕像外表的酸洗劑液體。
3） : after pickling, the pickling agent liquid on the surface of the mirror stainless steel pebble statue is washed with clean water.
四)：用專用的不銹鋼鏡面拋光劑侵泡30分鐘以上，鏡面成效出來了 就能夠把鏡面不銹鋼鵝卵石雕像拿出來了。
4） : soak with special stainless steel mirror polishing agent for more than 30 minutes. When the mirror effect comes out, the stainless steel pebble statue can be taken out.
五)：用清水洗干凈鏡面不銹鋼鵝卵石雕像后，然后再用純水洗干凈就能夠進行烘干料理了。
5） : after washing the mirror stainless steel pebble statue with clean water, and then washing it with pure water, it can be dried and cooked.
