雕塑的優點是耐候性強，不褪色等，藝術手法還原度好，細節表現的更為精細，但其工藝復雜、流程繁多、成本也高，所以
山東浮雕雕塑廠家在雕塑的維護保養很重要的。
Sculpture has the advantages of strong weather resistance, color fastness, etc., good restoration of artistic techniques, and more detailed performance, but its process is complex, numerous processes, and high cost. Therefore, Shandong relief sculpture manufacturers are very important in the maintenance of sculpture.
1、環境：雕塑對環境的要求須保持干燥，所處的溫度控制在18℃-24℃，濕度在40%-50%，沒有塵埃和空氣污染物。
1. Environment: The sculpture must be kept dry, the temperature should be controlled at 18 ℃ - 24 ℃, the humidity should be 40% - 50%, and there should be no dust and air pollutants.
2、預防：在保養雕塑時,要學會預防一些外界的有害化學物質,如酸類、油脂、氯化物等。排除外界因素的同時我們盡量避免在搬運過程中直接用手觸碰雕塑，不可用手直接接觸,以避免被手上的汗腐蝕，也不可用油污的紙或盒子來包裝。
2. Prevention: When maintaining sculpture, learn to prevent some harmful chemicals from outside, such as acids, grease, chlorides, etc. While excluding the external factors, we try to avoid touching the sculpture directly with hands during the handling process, and do not touch it directly with hands to avoid being corroded by sweat on the hands, and do not use oily paper or boxes for packaging.
3、清潔：在對雕塑進行清潔的時候要切忌小心謹慎，一定要用干凈而又柔軟的布片來擦去塵埃，對于雕塑有些溝處不易用布擦到的地方用毛刷或是吸塵器來吹走灰塵。
3. Cleaning: Do not be careful when cleaning the sculpture. Be sure to use a clean and soft cloth to remove the dust. Use a brush or vacuum cleaner to blow away the dust at some grooves of the sculpture where it is difficult to use a cloth.
4、維護：預防雕塑受到機械性損壞，相互間不應該彼此碰撞、不要疊壓碼放、對于細工精制和容易損壞的銅雕,更加要小心維護。
4. Maintenance: prevent sculptures from mechanical damage, do not collide with each other, do not stack, and pay more attention to the fine and easily damaged bronze sculptures.
5、涂蠟：有條件可以在銅擺件表面打一些蠟用于防止銅表面氧化長銅銹。
5. Waxing: If possible, you can apply some wax on the surface of copper ornaments to prevent copper surface from oxidation and long copper rust.
6、拋光：雕塑擺放時間過長之后，根據擺放的環境或多或少會出現一些暗啞的現象，這個時候可以用棉絲質的細布輕輕來回擦拭，可達到拋光的效果，從而讓表面的保護蠟層重新煥發光。
6. Polishing: After the sculpture is placed for a long time, there will be some dull phenomena more or less according to the placing environment. At this time, you can use a cotton silk cloth to gently wipe back and forth to achieve the polishing effect, so that the protective wax layer on the surface can glow again.
The above is an introduction to how sculpture manufacturers maintain their sculptures daily. I hope it can help you. More relevant content will come to our website http://www.xinyanse.com Consult and understand!
