GRC構件開始施工前有個重要的工作是配置砂漿，這一步很重要，砂漿的質量直接影響到了零件粘貼的牢固性能，下面來說說GRC構件配置砂漿的過程，以及本身的主要特點。
An important work before GRC components start construction is to configure mortar. This step is very important. The quality of mortar directly affects the firmness of parts pasted. Next, let's talk about the process of GRC components configuring mortar and its main characteristics.
山東GRC構件配置砂漿過程
Mortar preparation process of Shandong GRC components
1、施工使用的砂漿是針對GRC構件基面要求而特殊配置的專用粘結復合型砂漿。GRC構件2、施工時用電動攪拌機攪拌，攪拌需要充分、均勻，稠度適中。攪拌作業時，先加水，再加砂漿，攪拌桶逆時針20-30轉旋轉，攪拌葉輪固定死順時針700轉左右旋轉，砂漿高度（攪拌原料）永遠高于攪拌葉輪，即使攪拌葉輪高速旋轉時，也不要看到葉片為佳。
1. The mortar used in construction is a special bonding composite mortar specially configured for the requirements of GRC component base. GRC component 2. During construction, use an electric mixer to mix. The mixing needs to be full and uniform, and the consistency is moderate. During mixing operation, add water first, and then add mortar. The mixing bucket rotates counterclockwise for 20-30 revolutions, the mixing impeller is fixed, and rotates clockwise for about 700 revolutions. The mortar height (mixing raw materials) is always higher than the mixing impeller. Even when the mixing impeller rotates at high speed, it is better not to see the blades.
3、GRC構件砂漿調制攪拌完畢后，停止攪拌桶與攪拌葉輪旋轉，另一部電機控制攪拌桶翻轉倒出砂漿，使用前需靜置五分鐘，之后使用前再次進行攪拌，攪拌好的砂漿應在三個小時內用完，以免錯過砂漿使用的較好時間影響效果。另外，要特別注意的時，攪拌機在工作中切勿因查看攪拌效果去撈砂漿，一定要注意防止發生胳膊絞入機器的危險情況。
3. After the GRC component mortar is mixed, stop the rotation of the mixing bucket and the mixing impeller, and another motor controls the mixing bucket to turn over and pour out the mortar. It needs to stand for five minutes before use, and then mix again before use. The mixed mortar should be used up within three hours, so as not to miss the good time of mortar use and affect the effect. In addition, special attention should be paid to the fact that the mixer should not fish for mortar due to checking the mixing effect during operation, and attention must be paid to prevent the dangerous situation of arm twisting into the machine.
Main features of GRC components in Shandong
GRC構件是在模具中制作成型的。由于重量輕，實現造型很方便，GRC可以做成各種復雜的造型。
GRC components are made and formed in the mold. Due to its light weight, GRC can be made into various complex shapes.
GRC表面質感是由模具質感所決定的。由于GRC中沒有粗集料，所用細集料的顆粒也比較細。因此，可以細膩、準確地表現不同的質感與紋理。既可以做得光滑如鏡也可以做得粗糙似石。復制的各種質感效果非常逼真，是非常理想的仿真材料。
GRC surface texture is determined by mold texture. Since there is no coarse aggregate in GRC, the particles of fine aggregate used are also relatively fine. Therefore, it can express different textures and textures delicately and accurately. It can be made smooth as a mirror or rough as a stone. All kinds of texture effects copied are very realistic, which is a very ideal simulation material.
GRC與其他墻體圍護結構比較，其制造和安裝過程消耗能源要少，日本學者曾經做過GRC墻板與鋼筋混凝土墻板的碳排放量比較，使用GRC墻板可以降低30%的碳排放量。
Compared with other wall enclosure structures, GRC consumes less energy in the process of manufacturing and installation. Japanese scholars have made a comparison of carbon emissions between GRC wallboard and reinforced concrete wallboard, and the use of GRC wallboard can reduce carbon emissions by 30%.
As a relatively new building material in China, this product has been used more and more in recent years, and its influence in the field of architectural design has become greater and greater, and it has soon been adopted by many designers in China. If you need to purchase or install, please come to our website http://www.xinyanse.com Consult and understand.
